Maintaining it and maximizing its potential helps a business stay competitive, From the “i” designation, I would think it’s integrated but all price lists seems to indicate that one of the machine’s internal PCI slot is already in use we assume by the RAID card. That being said, the actually aren’t much more expensive than the if at all so we might get these anyway. Thanks for your feedback, much appreciated. Could anyone who has such a machine let me know, please? The server will confirm once more and ask you to press F10 to save the changes.
|Date Added:||26 September 2004|
|File Size:||68.61 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Oh and another tip, skip the cable management arms on the DL’s anything you set up. Apr 24, Posts: Make sure you have physical or console access to the server you wish to create the array on. Liked what you read? Unless of course you are going to radi VMFS volumes off the same drives. We suggest changing the RAID level to fit your needs.
Accessing the RAID setup on an HP Proliant DL380 G7
Some things don’t work. Select the drives that you would like to include in the array. I have four G5s that have controoler issue and once the server hang and ASR is disabled, the server will not reboot obviously and will stay hang until I force reboot through iLO.
We had plenty of problems with iLo drivers and firmware until we disabled ASR, but that was caught before production Nah, once we disabled ASR we haven’t had any issues with the G5’s.
You will be presented with the array configuration screen. If you do not press any key, you will be given a chance to run the Option ROM Configuration for another controller.
Actually these were all HP sticks, 4 of 5 failed in less than 3 years. From the “i” designation, I would think it’s integrated but all price lists seems to indicate that one of the machine’s internal PCI slot is already in use we assume by the RAID card.
But we will need the Ccontroller slots to put the FC and ethernet cards and, if we don’t have them, we have no choice but go with the Thanks for your feedback, much appreciated.
Jul 18, Posts: If you have remaining unconfigured drives you may create another array.
raiv Otherwise you can press escape to exit the menu. If there are remaining controllers that have yet to display their option ROM messages, you will be given a chance to configure them now.
The controller will select an aproprate RAID level for the number of disks.
HP Proliant DLG7, where is [F8] menu? | IT Blog
Works well and saves the power consumption of a couple of disks, plus the cost. It may take a few presses, after which the server should start rqid details about the startup process.
Tue Jan 11, 1: Built Exactly to Your Needs. Even with a clean layout it’s just damn hard to get to 7g locking tabs on the ethernet cables without using a small screwdriver or hiring an intern with long fingernails. Unsupported RAID levels will be cntroller. Select the option to create a logical drive.
The server will confirm once more and ask you to press F10 to save the changes. As for SSDs, R10 is great, I use it extensively BUT I will caveat that by saying that I use HP branded SSDs, non-branded ones aren’t supported but there’s a lot of evidence to suggest they work fine although some of the more advanced diags and alerting may not function entirely correctly. Of course then they went and messed up the first rev 1GB modules but I think that’s now fixed didn’t have it bite me but read enough horror stories.