Bumping my RAM up to 2. We receive spam notifications and will take immediate action! Yes, my password is: Now, my Q’s temperatures were another story Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position. I meant not on the DS3L. Page 43 Resume by Alarm Determines whether to power on the system at a desired time.

Uploader: Malmaran
Date Added: 1 November 2010
File Size: 66.71 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49419
Price: Free* [*Free Regsitration Required]

Nize review A very informative one 2. Normal Supplies the memory voltage as required.

Gigabyte GA-P35-DS3R vs GA-P35-DS3L/S3L

The following procedure uses Intel boxed cooler as the example cooler. Originally Posted by Chike.

It was even very hot at stock 47C idle, 72C load. Only one GPU slot so if your after Sli stay clear!

You can’t go wrong with this board. At this point, the only option that I see is to test with different hardware to make sure that the problems isn’t due to faulty: Bumping my RAM up to 2.

If your system becomes unstable after you overclock the DDR2 memory, select Option 1 or Option 2 to help make your system more stable. Have you tried using 6x multi rather than 7x? If a cable problem occurs on a specified pair of wires, the Status field will show Short and thenlength shown will be the approximate distance to the fault or short. When a Cable Problem Occurs Skill Memory Products G. Insert the floppy disk containing the BIOS file into the floppy disk drive.


Next try a long CMOS clear, with the buterry removed and the pins shorted for 30 minutes. Well the “D” stands for “Ultra Durable”.

Holy crap, that is HOT! No, create an account now. You may press the Install button following an item to install it. So, when I did my first overclock on it, I decided to just knock it up to 2.

Xpress Recovery2 will begin the backup process Figure It is recommended that memory of the same capacity, brand, speed, and chips be used.

I managed to use the Master ATA port on the lower of my two drives, leaving one entirely useless. You can access Boot Menu again to change the first boot device setting as needed. We receive spam notifications and will take immediate action!

Then you will boot back into the bios and make any required bios settings for your regular setup. You don’t even want to see the temperatures PCI Ex- press x16 slot.


I also found it sd3l that the CMOS clear jumper is only two pins on this motherboard, and actually lacks a jumper entirely, so you’ll need your own if you want to clear your CMOS.

Xpress Recovery2 will automatically create a new partition to store the backup image file. I did a little update in the first post on how high I could get the FSB. Discussion threads can be closed at any time at our discretion.

GA-PDS3L (rev. ) | Motherboard – GIGABYTE Global

To stop playing, click the Stop button 5. Do you already have an account? The time now is